Ceramic roller is a kind of roller made of ceramic processing, for the ceramic roller after the use of attention is to its cleaning work, now the cleaning method of ceramic roller mainly includes powder spraying cleaning and ultrasonic cleaning.

1. Spray powder for cleaning

The method that spray powder cleanness is a kind of method that USES external impact, it is a kind of physics action completely, can clean ceramic roll basically still want to see the stability of air pressure and size. This method has the advantage of low cost, simple structure and convenient operation. But at the same time also has many shortcomings, the powder particle size are different, and prone to agglomerate and the condition of the nozzle to blocked, if is a line of ceramic roller will not be able to complete the clean, if all pressure has been high, time is long wall could be broken, nets stick also useless, in addition the method of powder leakage is likely to happen, affect the environment, but also because the flow of air pressure is different, so in this way when cleaning ceramic roller clean degree may appear difference.

2. Ultrasonic cleaning

This is a relatively new method, it combines physical and chemical corrosion prevention, the use of very small bubbles can be very easy to clean the dirt inside the mesh hole, so the use of this method to clean the number of high line ceramic roller when the effect is very obvious. This ultrasonic equipment is also a very environmentally friendly cleaning equipment, which can be used to clean various materials of ceramic rollers and other printing sticks, will not cause damage to the environment. However, the ultrasonic cleaning equipment also has its shortcomings, such as its relatively high manufacturing cost, there will be noise in the operation, if cracks appear in the ceramic roller above the case, using it to clean may make the cracks more serious.

Therefore, after the use of ceramic rollers in accordance with the actual situation of the enterprise and the state of ceramic rollers to choose the most appropriate one, to extend the service life of ceramic rollers.